ACE Ecco250 Instrukcja Instalacji Pobierz pdf

REMOVE HDD BRACKET

ASSEMBLE POWER SUPPLY

ASSEMBLE ODD (OPTICAL DRIVE)

ASSEMBLE HDD

1. Remove bottom screw

2. Remove top thumb screws

3. Slide secure lock to the right

4. Lift

1. Remove screws 2. Remove screws

3. Remove case bracket

4. Remove screw

5. Remove PSU support bracket

6. Gently press the power supply into

place (the fan should be facing down)

7. Secure with screws

8. Put case bracket back into place

9. Secure with screws

10. Put PSU support bracket into place and secure with screws

11. Secure case bracket with screws

1. Remove front panel by puting your

and pull gently

2. Gently bend clips to remove 5,25”

cover where you want to place the ODD

3. Slide secure lock to the right and lift

4. Slide in ODD

5. Slide lock to the left to lock in place

(Optional: remove secure lock and screw ODD into place)

6. Put front panel back into place

A. For 3,5” HDD (Two per bracket)

B. For 2,5” HDD (Three per bracket)

On HDD bracket:

1. Screw your HDD into place

2. Assamble bracket back into case

In external 3,5”:

1. Screw your HDD into place

(both sides if needed)

Bottom of case:

1. Screw your HDD into place

Tip:

Use bracket holder while

working in the case.

INSTALLATION MANUAL

INSTALLATION MANUAL 1

Podsumowanie treści

Strona 1 - INSTALLATION MANUAL

REMOVE HDD BRACKETASSEMBLE POWER SUPPLYASSEMBLE ODD (OPTICAL DRIVE)ASSEMBLE HDD1. Remove bottom screw2. Remove top thumb screws3. Slide secure lock to

Komentarze do niniejszej Instrukcji

Brak uwag

ACE Ecco250 Instrukcja Instalacji

Przeglądaj online lub pobierz Instrukcja Instalacji dla Obudowy komputerowe ACE Ecco250. ACE Ecco250 Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji